Recessed installation downlight you know how much?

Nowadays, the downlight is basically fixed in the form of snap, so the installation method is very simple, the installation focus is before installing the downlight

You must know the Size of the downlight, corresponding to the Ceiling for the opening, here we come to look at the correct LED downlight installation method.
 

1、Measure the downlight size and determine the ceiling opening size;

2、According to the size of the opening, use a measuring device to draw a circular mark on the ceiling and use a small hand saw to open the hole;

3、Connect the reserved power cord inside the ceiling with the power connector of the downlight;

4、Adjust the spring clips of the downlight vertically and put it into the open ceiling hole;

5、Loosen the spring snap on both sides of the downlight and snap it to the back of the ceiling;

6、check whether the light is stable, complete the downlight installation.

Here is our Vertex hot selling recessed downlight, F1232C.

● Compact Fire Rated downlight for shallow ceiling voids.

● Suitable for standard GU10 LED or halogen lamps retrofit.

● Loop-in/out connector, screwless terminal block for quick installation

● Ultra-slim bezel for modern design

● Insulation compatible: Yes

● 30,60,90 minute Fire rated: solid Timber joist, I-joist and Metal Web joist

If you want to know more about recessed downlight, please contact us>>>>